Mopar Intake Plenum Gasket – Part No: 05184562AC

Introduction

At AU 4×4 Solution, we know every seal matters—especially under the demanding conditions Aussie off-roaders put their rigs through. That’s why we offer the genuine Mopar 05184562AC intake plenum gasket. The 05184562AC delivers a factory-level seal for the upper intake plenum, ensuring your 3.0–3.6 L V6 engine runs efficiently, leak‑free, and reliably. Whether you’re hitting the Outback or navigating city streets, this gasket keeps your engine sealed tight and performing at its best.

What Is the 05184562AC Gasket?

The 05184562AC is an OEM intake plenum gasket built by Mopar. It seals the joint between the upper intake plenum and lower intake manifold. This prevents leaks of air, coolant, and vacuum—vital for engine performance. Also known as intake manifold plenum gasket or mounting gasket, it ensures proper engine breathing, idle stability, and emission control

Compatible with 3.6 L and 3.0 L V6 engines (2011–2020), the 05184562AC replaces older part numbers like 5184562AC  Sold individually, order the correct quantity—usually six gaskets for full installation

Vehicle Compatibility

The 05184562AC fits a range of Chrysler, Dodge, Jeep, and Ram models:

• Jeep

  • Wrangler JK (2011–2020)

  • Grand Cherokee WK2 (2011–2020)

  • Cherokee KL (2011–2020)

• Chrysler/Dodge

  • Chrysler 200 & 300 (2011–2020)

  • Dodge Charger, Challenger, Journey, Avenger, Grand Caravan, Durango (2011–2020)

• Ram

  • Ram 1500 (Hemi V6) 3.6 L (2011–2020)

It covers AWD and 4×4 trims, and engine variants—3.0 L, 3.6 L V6 with VVT/ESS, Flex‑Fuel

Why Choose the 05184562AC Gasket from AU 4×4 Solution?

 1. Genuine OEM Assurance

Designed and manufactured by Mopar to factory specs. Guarantees leak-free performance and exact fit. This is the factory-recommended gasket: 05184562AC

 2. Affordable & Available

Priced around US $6–$12 per gasket—significantly cheaper than dealer bundles. Available with factory warranty via AU 4×4 Solution .

 3. Prevents Performance & Reliability Issues

Leaky intake gaskets cause rough idle, misfires, coolant loss, and engine damage. The 05184562AC restores seal integrity to factory standards .

 4. Easy Installation

Each gasket installs with basic tools. Replace all six gaskets during intake removal or engine rebuild for best results.

 5. Durable Design

Made from high-grade materials to resist heat, vibration, and chemical exposure. Lasts the life of your engine.

  Installation Guide (Simplified)

1. Prepare: Park cool engine, disconnect battery, and remove airbox.

2. Take out upper intake plenum (keep bolts handy).

3. Remove old gaskets—clean surfaces thoroughly.

4. Install fresh 05184562AC gaskets (apply thin sealant if desired).

5. Reinstall plenum, torque bolts in sequence to spec.

6. Reconnect all removed components.

7. Start engine and check for vacuum leaks, misfires, coolant leaks, or abnormal idle.

8. Road test, then retorque bolts after heat cycle.

Key Features

• Genuine Mopar OEM – part # 05184562AC

• Direct fit for intake plenum to manifold seal

• Compatible with 3.0 L and 3.6 L V6 engines (2011–2020)

• Replaces older gaskets: 5184562AC

• Sold individually – order per intake rail

• High-grade sealing material for heat, vacuum, coolant

• Factory warranty with AU 4×4 Solution purchase

• Affordable at ~US $6–12 each

• Prevents vacuum leaks, misfires, coolant loss, rough idle

 Frequently Asked Questions (FAQ)

1. What is the purpose of 05184562AC?
It seals the joint between the upper plenum and lower intake manifold to prevent vacuum or coolant leaks, essential for engine performance

2. How many gaskets do I need?
Typically six—one for each intake port. However, order based on your vehicle’s intake design .

3. Can I install it myself?
Yes. Basic mechanical skills and tools suffice. Follow the step-by-step guide above and torque bolts to factory settings.

4. What happens if I don’t replace a bad intake gasket?
Symptoms include rough idle, misfire codes, coolant in intake, overheating, and engine damage

5. Is 05184562AC the correct part for my Jeep/Wrangler?
Yes—fits 2011–2020 3.6 L V6 in Wrangler JK, Grand Cherokee, Cherokee KL. Always confirm compatibility via VIN before ordering.

 Conclusion

When reliability counts, trust the 05184562AC—a genuine Mopar intake plenum gasket built to last. Designed for 3.0–3.6 L V6 engines in Jeep, Dodge, Chrysler, and Ram models, this gasket protects engine performance and integrity. Backed by AU 4×4 Solution’s factory warranty and support, installation is straightforward and affordable. Prevent leaks, improve idling, and extend engine life with the 05184562AC intake plenum gasket. Get yours today and hit the trails with confidence.