Introduction
Your vehicle’s performance relies on precise engineering and dependable components—and sealing systems are no exception. The MOPAR OIL COOLER GASKET 05175579AC is a crucial OEM component that provides an essential seal between the oil cooler and the engine, preventing leaks, overheating, and reduced oil pressure. At AU 4×4 Solution, we stock only the most reliable, genuine automotive parts to keep your 4WD or daily driver running at peak performance. If you’re replacing a leaking gasket or performing a full oil cooler service, trust MOPAR OIL COOLER GASKET 05175579AC to deliver a leak-proof, OEM-standard seal.
What is the MOPAR OIL COOLER GASKET 05175579AC?
The MOPAR OIL COOLER GASKET 05175579AC is an original equipment manufacturer (OEM) gasket designed specifically for Chrysler, Dodge, Jeep, and RAM vehicles. Its job is to create a tight seal between the oil cooler and the engine block or oil filter housing. This gasket prevents oil from leaking out of the system and protects the engine from low oil pressure and overheating.
Unlike aftermarket alternatives, the MOPAR OIL COOLER GASKET 05175579AC is made from high-quality, heat-resistant rubber materials that meet factory specifications. This ensures long-lasting durability, resistance to extreme temperatures, and a precise fit that only OEM parts can guarantee.
Why the Right Gasket Matters
If your oil cooler gasket is worn, cracked, or improperly sealed, it can lead to serious engine problems. Oil leakage can cause:
Low oil pressure
Loss of engine lubrication
Increased engine wear
Oil contamination of other engine components
Compatible Vehicles
The MOPAR OIL COOLER GASKET 05175579AC is compatible with a wide range of Chrysler, Dodge, Jeep, and RAM vehicles, including:
Jeep Grand Cherokee
Jeep Wrangler JK
Dodge Durango
Dodge Charger
Chrysler 300
RAM 1500 and RAM 2500 (select engines)
Key Features
Genuine OEM Mopar part – Direct replacement for factory-installed gasket
Prevents oil leaks – Maintains engine oil pressure and cooling performance
Heat and oil resistant – Withstands high temperatures and pressures
Exact fit – No need for trimming or adjusting
Made from durable rubber compounds – Resists cracking, shrinking, or breakdown
Engineered to Mopar specifications – Meets or exceeds OEM standards
Ideal for Australian conditions – Durable under heat, off-road, and long-distance driving
When to Replace Your Oil Cooler Gasket
Over time, your oil cooler gasket can deteriorate due to:
High engine heat
Constant exposure to oil
Vibration and engine stress
You should consider replacing the MOPAR OIL COOLER GASKET 05175579AC if you notice:
Visible oil leaks near the oil cooler
Low oil levels without other explanation
Oil stains under the vehicle
Engine overheating
A burning oil smell
Installation Tips
Although installation can vary by vehicle, here’s a general overview:
Allow the engine to cool.
Drain the oil from the system.
Remove the oil cooler or oil filter housing (depending on application).
Clean the sealing surfaces thoroughly to remove old gasket residue and oil.
Install the new MOPAR OIL COOLER GASKET 05175579AC carefully and align it correctly.
Reattach components and refill engine oil.
Check for leaks after running the engine for a few minutes.
OEM vs. Aftermarket Gaskets: Why OEM Wins
While aftermarket options might seem cost-effective, they often lack the quality, precision, and material standards of OEM parts. Here’s why choosing the MOPAR OIL COOLER GASKET 05175579AC is the smarter investment:
Exact Fit: Designed specifically for your engine configuration.
Longer Life: Built to withstand OEM operating conditions.
Peace of Mind: Trusted by Mopar engineers and vehicle manufacturers.
Warranty Safe: Keeps your vehicle within warranty compliance.
Related Search Keywords (SEO):
Mopar oil cooler gasket replacement
Oil cooler leak fix Jeep Grand Cherokee
05175579AC gasket fitment
Chrysler oil leak gasket repair
Jeep oil cooler seal
Dodge Durango oil cooler gasket kit
RAM 1500 oil filter housing gasket
OEM Mopar gasket 05175579AC
Engine oil cooler gasket replacement
Frequently Asked Questions (FAQs)
Q1. What does the MOPAR OIL COOLER GASKET 05175579AC do?
A: It seals the connection between the oil cooler and engine, preventing oil leaks and helping maintain proper engine oil pressure and cooling.
Q2. How can I tell if this gasket is failing?
A: Look for oil leaks near the oil cooler, low oil levels, engine overheating, or a burning oil smell—these are signs your gasket may be failing.
Q3. Is this gasket difficult to install?
A: With basic automotive knowledge and tools, it’s a manageable DIY job. However, professional installation is recommended if you’re unsure.
Q4. Will this fit my Jeep Wrangler JK 3.6L V6?
A: Yes, the MOPAR OIL COOLER GASKET 05175579AC is compatible with several 3.6L Pentastar engines used in Jeep models, including the Wrangler JK.
Q5. Why choose an OEM gasket over an aftermarket one?
A: OEM gaskets offer precise fit, higher durability, and meet factory standards—reducing the chance of leaks and premature failure.
Why Buy from AU 4×4 Solution?
Australian-Owned & Operated
Fast Nationwide Shipping
Genuine OEM Parts Only
Friendly Technical Support
Trusted by Mechanics Across Australia
5-Star Rated for Service and Product Reliability
Conclusion
If you want a high-performance, long-lasting solution to oil cooler leaks, the MOPAR OIL COOLER GASKET 05175579AC is your best option. Designed by Mopar to fit perfectly and perform reliably, this gasket ensures your engine stays cool and leak-free under all conditions. Don’t risk your vehicle’s health with cheap aftermarket seals—trust the proven quality of MOPAR OIL COOLER GASKET 05175579AC from AU 4×4 Solution today.
Reviews
There are no reviews yet.