Mopar Valve Cover Gasket-Part No: 04893805AB

Introduction: Seal the Deal with the 04893805AB Valve Cover Gasket

When it comes to engine performance and reliability, every component matters—especially the parts that keep your engine sealed, clean, and leak-free. The 04893805AB Valve Cover Gasket plays a crucial role in preventing oil from escaping the engine and contaminating other parts under the hood. For Jeep, Dodge, and Chrysler 4×4 vehicles, this gasket ensures that your valve cover is properly sealed, keeping the internal parts protected from dust, debris, and oil leaks.

At AU 4×4 Solution, we provide the 04893805AB VALVE COVER GASKET, a trusted and durable solution engineered to meet or exceed OEM standards. Whether you’re performing routine maintenance or replacing a faulty gasket, this product ensures the job is done right the first time.

What Is the 04893805AB Valve Cover Gasket?

The 04893805AB Valve Cover Gasket is a high-quality sealing component placed between the valve cover and the cylinder head of your engine. Its primary role is to seal the top portion of the engine to:

• Prevent oil leaks

• Maintain consistent engine pressure

• Keep contaminants out of the engine

• Ensure smooth engine performance

Over time, valve cover gaskets can degrade due to exposure to high heat, pressure, and oil residue. That’s why replacing a worn-out gasket with the 04893805AB is essential to maintain engine health and avoid costly repairs.

Compatible Vehicles

The 04893805AB Valve Cover Gasket is used across a wide range of Chrysler, Jeep, and Dodge vehicles. It is commonly found in:

• Jeep Grand Cherokee

• Dodge Dakota

• Chrysler 300

• Jeep Liberty

• Dodge Durango

• Dodge Ram 1500/2500

• Jeep Commander

Always cross-check your vehicle’s OEM part number to confirm compatibility or contact our expert support team at AU 4×4 Solution.

Why Choose the 04893805AB Valve Cover Gasket?

Oil leaks can be a sign of bigger problems and can quickly lead to engine damage. Choosing the 04893805AB Valve Cover Gasket ensures:

•  A secure and tight seal

• Engine oil stays where it should

• Clean engine bay – no oil mess

• Enhanced performance by preventing pressure loss

•  Protection against dirt and debris entering the cylinder head

This gasket is manufactured from premium-quality rubber or synthetic rubber compounds (depending on design), which offer excellent resistance to oil, heat, and wear.

Key Features of the 04893805AB Valve Cover Gasket

• OEM-Quality Construction – Meets or exceeds factory performance standards

• Perfect Fit for Chrysler/Jeep/Dodge – Ensures fast, hassle-free installation

• Durable Rubber Material – Withstands engine heat, pressure, and oil contact

• Seals Effectively – Prevents oil leaks and engine bay contamination

• Protects Internal Components – Stops dirt, moisture, and debris from entering

• Designed for Longevity – Reduces maintenance and increases reliability

• Supports Engine Efficiency – Helps maintain optimal pressure and oil circulation

Symptoms of a Faulty Valve Cover Gasket

Not sure if your 04893805AB Valve Cover Gasket needs replacing? Here are the most common warning signs:

• Oil leaking near the valve cover

• Burning oil smell from the engine

• Engine misfire or rough idling

• Visible oil on spark plugs or wires

• Check Engine Light (CEL) is on

Ignoring these symptoms can lead to serious engine issues, including spark plug damage, engine misfires, and performance loss. If you notice any of the above, it’s time to inspect your gasket and replace it with the 04893805AB.

Installation Guide: Replacing the 04893805AB Valve Cover Gasket

Replacing the valve cover gasket isn’t just for mechanics—it’s manageable for most DIYers with basic tools. Here’s a general overview:

1. Allow Engine to Cool – Safety first.

2. Remove Engine Cover and Components – Access the valve cover by removing air hoses and ignition coils.

3. Unbolt Valve Cover – Gently lift the valve cover without damaging the surrounding parts.

4. Clean Mating Surfaces – Remove all debris and old gasket material.

5. Install the New 04893805AB Gasket – Seat the gasket carefully into place, ensuring alignment.

6. Reassemble and Torque Bolts – Follow manufacturer torque specs.

7. Start Engine and Check for Leaks

Why Buy from AU 4×4 Solution?

At AU 4×4 Solution, we’re passionate about keeping Australia’s 4WDs running reliably—whether you’re cruising through city streets or tackling rough bush trails. Here’s why customers across the country trust us:

• Expert Knowledge – We’re not just a parts store; we’re 4×4 specialists.

• Fast Australia-Wide Shipping – Get your parts when you need them.

• Genuine & High-Quality Parts – Only products we’d install on our own 4WDs.

• Responsive Customer Support – Real advice from real people.

• Safe & Secure Shopping Experience

You drive tough, and so should your parts. Choose AU 4×4 Solution for guaranteed satisfaction.

Frequently Asked Questions (FAQs)

1. What does the 04893805AB Valve Cover Gasket do?
It seals the area between the valve cover and cylinder head to prevent oil leaks and maintain pressure inside the engine.

2. Is this gasket compatible with all Jeep or Dodge engines?
No, it fits specific engines. Always check your VIN or OEM part number to confirm compatibility.

3. Can I reuse an old valve cover gasket?
Reusing a gasket is not recommended. Once compressed and heat-cycled, gaskets should be replaced to ensure a proper seal.

4. What are the signs of a leaking valve cover gasket?
Look for oil leaks around the valve cover, burnt oil smell, engine misfires, and visible oil on engine components.

5. How often should the valve cover gasket be replaced?
Typically between 80,000 to 160,000 km or as needed. Regular inspection during service intervals is recommended.

Conclusion: Trust the 04893805AB Valve Cover Gasket to Keep Your Engine Sealed Tight

When your engine demands peak performance, don’t let a worn-out seal compromise it. The 04893805AB Valve Cover Gasket is your first line of defense against oil leaks, pressure loss, and internal contamination. Whether you’re on a rugged trail or cruising the highway, this gasket keeps your engine running clean, efficient, and protected.

At AU 4×4 Solution, we know the importance of using only the best parts. That’s why we offer the 04893805AB Valve Cover Gasket—engineered for long-term durability, ease of installation, and unbeatable value. Order yours today and experience the peace of mind that comes with a perfect seal.